Foyen
Foyen Garage Doors

Garage Door Spring Replacement: Torsion and Extension

A garage door spring replacement removes the broken spring or springs and fits new ones sized to your door. The springs, not the opener, do most of the lifting, so a broken one leaves the door extremely heavy.

Get a free spring replacement quote

Describe the job and add your city. Free to request, no obligation.

All requests are handled through this form. Add as much detail as you can and we will get back to you fast.

Torsion springs sit on a bar above the door and wind up as it closes, while extension springs run along the horizontal tracks and stretch. Both store a lot of energy, and a slipping winding bar or a snapping spring can cause serious injuries, which is why this is work for a trained technician, not a weekend project.

Springs are rated in cycles. A standard spring may last for around ten thousand cycles, which is several years of daily use, and a high-cycle spring lasts longer. If one spring has broken, its partner is usually the same age and close behind, so most technicians replace both.

What the work includes

  • Measuring the door weight, height and track radius to choose the right spring
  • Safely releasing any tension left in the broken spring
  • Removing the old springs, drums and bearings as needed
  • Fitting new torsion or extension springs with the correct wind count
  • Replacing worn cables, drums and center bearings
  • Safety cables on extension springs
  • Balancing the door so it stays in place at waist height
  • Testing the opener, sensors and auto-reverse
Replacing a torsion spring

How to tell a spring has broken

01

A loud bang from the garage, like a gunshot, when nobody was in it

02

A visible gap in the coiled spring above the door

03

The opener runs but the door barely lifts, or lifts a few inches

04

A door that feels extremely heavy when opened by hand

05

Cables hanging loose from the bottom brackets

06

A door that closes fast or slams shut

How the work goes, step by step

01

Confirm the break

The technician checks the springs, cables and drums to confirm what has failed and whether anything else is damaged.

02

Measure the door

Weight and height are measured so the new spring matches the load.

03

Release the tension

Any remaining tension is safely removed before the old springs come off.

04

Fit and wind

The new springs are fitted and wound to the right number of turns, and the cables are set.

05

Balance and test

The door is balanced by hand and tested with the opener, sensors and safety reverse.

What changes the price

Torsion or extension
Torsion systems and their hardware cost more than extension springs but are easier to balance and safer in a failure.
One spring or two
Replacing both springs at the same time costs more at first but avoids a second call.
Cycle rating
A high-cycle spring costs more up front and lasts for many more years of daily use.
Door weight and height
Heavier or taller doors need stronger springs and more hardware.
Related parts
Worn cables, drums or bearings are commonly replaced with the springs.
Emergency timing
A trapped car or a stuck door in the evening often calls for a rush visit.
Read the cost guide →

What a good quote spells out

  • The spring type, size and cycle rating written out
  • Whether both springs are replaced together
  • Cables, drums and bearings listed if they are worn
  • A note on safety cables for extension springs
  • The warranty on the springs and on the labour

Spring Replacement: questions people ask

Can a garage door spring be replaced by the homeowner?

It is not a good idea. Torsion springs are under great tension, and an unwinding bar can slip. A technician has winding bars and the experience to do it safely.

How long does a garage door spring last?

A standard spring is often rated for about ten thousand cycles, which can be several years for a busy household. High-cycle springs last longer.

Why replace both springs if only one broke?

They are the same age and carry the same load, so the second is likely to break soon. Replacing both keeps the door balanced.

How long does a spring replacement take?

Most spring jobs are done within a couple of hours once the technician has the right springs for the door.

Door Stuck, Noisy or Off Track? Get It Looked At.

Fill out the quote form with your city and what the door is doing. A local technician follows up to look at the door and give you a written quote. Free to request, no obligation.

Request a free quote →